432-889-5434 | 620-204-0883
×
Your cart is empty.

Applying MC-300

MC-300 World's First Corrosion PATENTED Protectant

Applying MC-300 is best achieved using several “light” coats, allowing it to dry between coats. At 70 degrees F, MC-300 will dry in minutes – full cure is achieved in 2 hours at that temperature. Warmer temperature will decrease drying time, and colder temperatures will increase drying time. The best application temperature is 70 degrees F. However the product can be applied at almost any temperature with success, given the temperature guidelines above.

Aerosol can: shake well for 10-20 seconds. Hold can vertically 8-12 inches away from the target surface. Make sweeping motion while depressing the nozzle. Make additional applications in different directions than the first, for complete coverage.

Bulk: Shake the container of MC-300 well and place product in sprayer. HVLP is the best method for application of bulk product. This method allows the most uniform application, giving the applicator the most control over placement.